Ready for some water heater maintenance today? It will not take a lot of time. . .literally we were thinking about 10 minutes. You bet, that could be as long as it will require to discuss a few maintenance tasks that any homeowner can complete. The best aspect is they can certainly help Jacksonville FL property owners with the following:Jacksonville Water Heater Maintenance Steps

Making sure ones water heater runs as long as possible, saving expenses.
Making sure ones water heater operates safely and securely.
Ensuring that it runs as energy efficiently as possible, likewise saving money.

So with that in mind, let us educate you on how to invest 10 minutes once or two times a year to help prevent any water heater repairs for your Jacksonville water heater.

Examining the T&P Relief Valve

The duty of the temperature and pressure relief valve, generally known as the T&P Valve, is incredibly crucial. It has the vital job of ensuring excessive pressure doesn’t establish inside the storage tank, which in turn guarantees the water heater will not explode. The infographic following indicates the following actions in evaluating it. The lever must be lifted a little and then let go of it. It is required to snap back to its closed location swiftly. In case it is functioning as it needs to, some water is often heard moving into the drain pipe below the valve handle that was previously lifted and the noise of a little pressure being released might be noticed. One will be needing a new valve if perhaps none of these things occur during the test.

Flushing Some of the Water from the Water Heater

In time, rust and sediment will appear within the water storage tank as a result of the chemical reactions going on with the components that are needed to heat the water. We will not go into the complex chemical specifics in this article, but through flushing a little of the water, it can help get rid of the sediment, and supply an occasion to find out how much sediment is within the water heater.

To accomplish a little flush, put a container under the drain valve, found on the bottom of the tank, and open the drain valve. Just drain several gallons of water – a couple buckets full. Enable the water to sit in the final pail for a number of minutes. After it settles, assess to find out how much sediment has settled to the lower part of the container. If there is, if the water heater has actually not been drained for a long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible.

Take note of how clean the water appears. When it doesn’t appear very dirty just carrying out the mini flush will be fine. If there is a great deal of sediment in the water a complete flush should be executed. If you’re sure it has not been drained for an extended time, if ever, it would be a good idea to empty it all.

We can not go directly into all the steps right here to accomplish this, however for educational purposes, initially decrease all the way the temperature. Wait at the very least an hour to enable the water to cool down before draining it. As opposed to utilizing the buckets, it really is easier to connect a hose to the drain valve and drain the water outside the house.

If one starts to be aware of weird popping sounds from the water storage tank, its a sign that there exists a significant level of sediment building up inside. This too cuts down on the energy efficiency of the water heater.

Water heaters will work quite nicely without having a great deal of maintenance, and a number of homeowners do not complete any maintenance for them. However, to realize the three advantages listed in the beginning of the post, it is vital to at least carry out these two jobs. If you have any problems or believe you want some help the very first time, contact us! We are always here to assist and to help avoid an unwanted Jacksonville Water Heater Repair.

Water Heater Repair Jacksonville Florida

From Visually.